Input |
Frequency: |
10 MHz, ±2 x
10-6 |
Level: |
7 dBm ±5 dB,
50 ohms |
Output |
| Frequency: |
80 MHz |
| Level: |
+13 dBm ±2 dB, 50 ohms |
Stability |
| Aging: |
±1 x 10-6/year after 30 days operating, typical |
| Output Phase Noise L(f):
Free Running |
10 Hz: -94
dBc/Hz*
100 Hz: -124 dBc/Hz
1 kHz: -152 dBc/Hz
10 kHz: -165 dBc/Hz
*10 Hz, typical, not measured |
| Temperature: |
±5 x 10-7, 0 to +50șC, ref +25șC, free-running |
| Harmonics: |
-30 dBc |
| Sub-Harmonics: |
-50 dBc |
| Non-Harmonics Spurious, typical: |
-80 dBc |
Adjustment |
| Loop Bandwidth |
Target Bandwidth: <10 Hz
Type 2 Loop |
|
Power Requirements |
| Warm-Up Power: |
8 watts at start-up for 5 min at +25șC |
| Total Power: |
5 watts at steady state +25șC |
| Supply Voltage: |
+15 VDC |
Phase Lock Alarm |
TTL |
Locked: +3.5 VDC to +5.2 VDC (Hi)
Out-of-lock: +0.8 VDC max (Lo) |
Phase Lock Voltage Monitor |
| Voltage monitor pin
supplied |
Mechanical |
| Crystal: |
SC-Cut |
| Dimensions: |
2.5 x 3.5 x 0.8" |
| Connectors: |
SMA and solder pins on side. Feed-thru terminals for lock
alarm, supply and phase lock voltage monitor. |
| Mounting: |
Threaded inserts on sides, 16 places; through
holes, 4 places; threaded inserts on base, 4 places |
| Packaging: |
Machined aluminum housing. |
|
Wenzel
Associates, Inc.
